Comparator Shims

Category:

Description

Meets API 1104, 13th. Edition requirements.

Tolerances: Notch locations + or – 1/64. Dimensions should exceed penetrameter size
by at least 1/8” on three sides.

Note: Comparator shims can be used in conjunction with or in lieu of penetrameter shims as required by Par. 8.4. Other configurations and dimensions may be used provided notches are “V” shaped 45 degree included angles and depth tolerances are + or – 0.001.

Standard: ¾” x 1 ¾” x 3/32” with .008” notch on ¼” center, .016” notch on ¾” center, and .032” notch on 1 1/8” center.

Item ID

Description

Size

COSHIM Comparator Shims 3/4” X 1 3/4” X 3/32”

Item ID

Description

Quantity

COSHIM Comparator Shims 16 and Over